Painting of high panels in TOGG Gemlik paint shop

Paint application on high panel surfaces in the paint shop section of TOGG Gemlik production facility.

Location
Gemlik, Bursa
Sector
Automotive & Manufacturing
Service
Paint application at height
Application on high panel surface in TOGG paint shop — TOGG Production Facility
Our team's application on high panel surfaces in TOGG Gemlik paint shop.

Project need

What surfaces did we work on in the paint shop?

The job we undertook at the automobile factory in Gemlik was the painting of the high panels in the paint shop section. The location of these panels and the production area beneath them determined the working area.

Application

How did we get to the tall panels?

Our team reached the panels with rope lines. He applied the paint in sections and visually inspected the completed surfaces.

Work areas

  • TOGG Gemlik production facility dyeing department
  • High-rise panel surfaces
  • Paint application with rope access
  • Workspace and access planning

Application process

  1. The panel surfaces to be worked on and access routes were evaluated together with the field conditions.

  2. Rope lines and sub-area security were planned taking into account the production facility operating rules.

  3. Paint application was carried out in controlled stages on high panel surfaces.

  4. Completed surfaces were visually inspected after application.

Site conditions that determine the work position

Inside the paint shop, the panels were located in the same work area as the steel carriers of the ceiling and the plumbing lines. In the field photographs, you can see our team reaching the high panel surface through these elements.

In this job, we positioned ourselves in front of the panel with rope lines; We also used the paint equipment at the application point. The access route and the order of the sections to be painted were discussed in the same site plan.

Application and control of completed surfaces

The paint job on the high panel surfaces was carried out in sections. After application, the completed surfaces were visually checked.

Our task in this reference was to apply paint with rope access on high panel surfaces in the paint shop section. The photos below show the access method and paint application point our team used during the work.

How to prepare a bid for a similar facility job?

During the proposal preparation, the approximate area of ​​the panel, its height from the ground, the current surface condition and the surrounding installation are examined together. The application conditions of the product, access setup and the working hours allowed by the facility determine the duration and team schedule.

TOGG Gemlik work is an example of the work we carry out in production facilities outside Istanbul. You can request a preliminary evaluation by sharing the location, panel photos and target working date for your facility across Türkiye.

ON SITE

Photos from the project.

One frame shows our technician working with painting equipment in front of the panel, and the other shows the access between the steel carriers of the ceiling. You can examine the working point by enlarging the photos.

All photos

What surfaces will be painted in your facility?

Share a photo of the panel or surface, its approximate area, and its height above the ground. Let's evaluate together whether the work can be done during production hours.

Request a quote for this job