Paint and Coating Applications at Height

Surface preparation, paint and protective coating applications on facades and industrial structures.

Rope access panel painting at TOGG production facility — TOGG Production Facility
Paint application on the high panel surface in TOGG Gemlik paint shop section.

Scope of service

Resistance of paint application at height; depends on surface preparation, environmental conditions and the correct layer system, as well as access. Olimpos divides the work area into sections; It carries out the preparation, application and control steps in a recorded manner.

Technical application service for businesses that want to have maintenance painting, renewal or protective coating on high facades and industrial surfaces without installing scaffolding or platforms.

  • Local application without scaffolding
  • Plan according to surface and environmental conditions
  • Use of controlled materials and equipment
  • Application registration with photo

Application areas

High-rise building exteriors

Factory and steel constructions

Tanks, silos and chimneys

Tower and high equipment

When is this service suitable?

If paint loss is localized

Intervention can be planned for paint deterioration in scattered or limited areas without covering the entire facade with scaffolding.

If the surface is high and complex

Appropriate access routes are created on towers, chimneys, tanks and recessed facades.

If there is paint loss with corrosion

The surface condition is examined; The preparation and coating system is determined according to the technical requirement.

Work methods and safety

Surface preparation

Loose paint, dirt and rust are removed from the surface by mechanical or appropriate methods within the scope.

Layered implementation

Primer, intermediate coat and top coat requirements are planned according to the product's technical document and project conditions.

Condition and quality control

Weather, surface and application conditions are monitored; completed areas are visually inspected.

Working order from site survey to delivery

  1. Site survey

    Surface, paint loss, access and environmental conditions are examined.

  2. System selection

    The preparation method, product system, consumption and stages are determined.

  3. Preparation and painting

    The surface is prepared and coats are applied according to technical requirement.

  4. Control and recording

    Once the application is completed, a photo delivery record is prepared.

Offer for painting at height in production facility

At TOGG Gemlik production facility, we applied paint by reaching the high panel surfaces of the paint shop section with a rope. The work area was divided according to panel surfaces; completed surfaces were visually inspected.

For a similar job, share the material and approximate area of ​​the surface to be painted. Knowing which surfaces require preparation, the condition of the existing coating, and the hours the facility can devote to work determines how many stages the job will be bid for.

What you can share for site survey

  • Photographs of surface material, approximate area and existing pavement
  • Desired color or product system and material supply
  • Working hours, facility availability and delivery expectations

How to prepare a proposal?

For the final offer, access conditions and the work to be done are evaluated together. The main issues affecting the cost of this service are:

Surface condition

Rust, old paint and preparation needs directly affect the total time.

Coating system

Product type, number of layers, consumption and drying intervals are evaluated.

Access and environment

Height, line installation, wind protection, bottom area and adjacent surfaces are planned.

Frequently asked questions

Can the exterior be painted with rope access?

If the construction and anchorage conditions are suitable, regional or planned exterior painting works can be carried out with rope access.

Can new paint be applied without removing the old paint?

Surface preparation is determined according to the adherence of the existing paint, rust, blistering and the product system. Direct application over loose or incompatible layers is not recommended.

Do weather conditions affect the paint job?

Yes. Temperature, surface humidity, wind and rainfall must be compatible with the application and drying conditions of the product used.

How is the paint price determined at altitude?

An offer is prepared after the survey based on the area, surface preparation, paint system, number of layers, access installation and work schedule.

ON SITE

Our work on site.

Examples of the panel painting and preparatory work on the ship surface at TOGG. Preparation and crayons are determined by the condition of the surface.

All photos